China Butt Weld Pipe Fittings Types And Sizes

according to customer’s requirement can produce the other's degree, such as 22.5 degree 30 degree 60 degree etc.
butt weld pipe fittings types and sizes Standard References
Our products are produced strictly based on the national standards GBT12459-05, GB13401-05; Sinopec standards SH3408, SH3409;Thermal power standard D-GD87; American national standards ASME B16.9, ANSI B16.9, B16.28, B16.11 and Japan national standard JISB2312.
Our major products
seamless or welded Tees, Crosses, LR & SR Elbows (180°, 90°, 45°), Reducers (Concentric or Eccentric), Stub Ends, End Caps, Socket & Threaded Couplings in material of stainless steel, carbon steel, alloy steel and other special steels. Size is from 1/2"(DN15) to 100’’(DN2500), the wall thickness is up to 100mm.
our company as  a pipe fitting manufacturers china ,if you need that pls contact us.

buy malleable iron pipe fittings importer

The initial raw material of each product has been reinspected before sent into factory , and qualified products can be put into use. Manufacture procedure is equipped with quality control points and full-time inspectors. We aims strictly downstream process is superior to upper process. And 100% PMI detection of alloy steel, stainless steel before product storage. Over the years, we always adhere to the quality first, and keep improving, At home and abroad, our products are widely used in industries such as Power Plant, , Oil and Gas, Chemical Engineering, Building Industry, Municipal Engineering, Shipping Building and related industry.Good products and services are worthy of the company's reputation all around the world. Besides standard products, we are able to develop and produce the related product according customer design and requirement.
Jizhong malleable iron pipe fittings can be used in various pipeline to convey gas,water,oil and so on .it have been exported to the 30 countries.have a widely market.
surface:hot dipped galvanized,electro dipped galvanized and black
size:1/4 to 6 inch.

 our company as a plumbing accessories suppliers,if you need that pls contact us.

High Pressure Welding Neck Carbon Steel Flange

High Pressure Welding Neck Carbon Steel Flange:
Type: ASME/ ANSI B16.5, ASME B16.47 FLANGE
Size range: 1/2" to 60"  DN15 to DN1500
Design: welding neck, slip on, blind, socket welding, threaded, lap-joint
Pressure: 150#, 300#, 600#,900#,1500#, 2500#
Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS
Material: carbon steel A105, A350 LF1,LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52,  F56,F60, F65
stainless steel : 304/304L, 316/316L
Alloy Steel: ASTM A182 F1,F5,F9,F11,F22,F91
Coating: black paint, yellow transparent paint, cold and hot dip galvanize
Package: seaworthy plywood case, wooden pallet.
Application:petroleum, chemical, machinery, boiler,electric power, shipbuilding, construction, etc.

our company provide pipe fitting China ,if you  need that pls contact us.

Teflon seal tape suppliers

Please send us some pictures and designs for checking if possible so we can do best as your request. Otherwise, we will recommend relevant products with details for your reference.
Teflon seal tape Product Description
Standard or Nonstandard: standard
Style: Mechanical Seal
Material: PTFE
Place of Origin:  Hebei, China (Mainland)
Brand Name:marvelseal
Model Number: 12mm
Spool and cover OD:56mm
Tape Colour: white

Our principle
1. Prompt reply within 24 hours.
2. High quality and guarantee.
3. Factory price with fast delivery.
4. Passion, patient to be on serve of you.

our company as a pipe fitting manufacturers,if you need that pls contact us.

butt weld pipe fittings types and sizes

We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: By sea, by air or by express. Any question about samples, please contact us.
butt weld pipe fittings types and sizes
1.Raw material:PE100 or PE80                                         
2.Color:black,yellow or as required
3.Size:please see the following table
4:Connecting way:butt fusion welding
5.Advantage:ODM.OEM
6.Pressure:PN4(SDR33),PN6(SDR21),PN8(SDR17),
   PN10(SDR13.6),PN12.5(SDR13.6)PN16(SDR11),PN20(SDR9)
7.Product feature:light weight,high strength, low resistance,
   corrosion resistance,easy installation, long lifespan,low cos
Applications:
1.Municipal water supply, gas supply and agriculture etc.
2.Commercial & Residential water supply
3.Industrial liquids transportation
4.Sewage treatment
5. Food and chemical industry
7. Replacement of cement pipes and steel pipes
8. Argillaceous silt, mud transportation
9. Garden green pipe networks

our company as a pipe fitting manufacturers,if you need that pls contact us.

cast iron cookware For Sale

Cast iron does not have any toxic chemicals associated with it. As iron is an element, it can leech into food. Most people consider this a health benefit, especially as many people lack dietary iron in their diet.
Cast iron casserole Advantage
1 European Design Enamel Cast Iron Round Shaped Dutch Oven
2 Enamel cast iron is a kind of excellent material, and can meet modern food preparation and cooking requirements.
 3 It can effectively retain heat, which can reduce the using of kitchen stove setting and oven cooking, at the dinner table,covered with lid can heat preservation and use used again.
4 The same also applies to frozen food.
5 Strong adhesion can ensure to pass the test, and also  the national food safety testing of enamel.
6 High quality first

our company as pipe fitting manufacturers ,if you need that pls contact us.

cast iron fry pan china manufacturers

Our company has always insterested in High quality, Good price and benefits to customer. With fine after-sale service,consumers always give us a good feedback. Products now are sold all over our country. Warmly welcome all fields of friends to visit our company and negotiate trade.
cast iron cookware Service:
1. Quality oriented, service supreme and fast reaction, we have professional team to follow every order.
2. We can provide OEM production for your design and your idea, we have special design departent.
3. Price advantage, we have our own production line and design department, so that can save you considerable cost.
4. Our products are approved by SGS, FDA, CE, LFGB, quality are ensured.
5. Payment term is very flexible, we can accept LC, TT, DA, DP, West Union, Payal and so on.
6. Fast Delivery: We have 4 production line, daily output capacity is 4000PCS, delivery time usually within 30 days.
7. Customized design and packings makes our products very popular worldwide especially in European and American countries.

our company as pipe fitting manufacturers ,if you need that pls contact us.

45°Banded Elbow China

1-1/4"DIN malleable iron pipe fitting 90 degree banded equal elbow
1)Surface:Hot-dipped galvanized,electric galvanized,black and bake galvanized.
    material:malleable iron
2)Variety:Plain,banded,beaded
     series:heavy,middle,light...
3)Size:1/8''-6''   equal
4)Certificate:ISO9001&BV
5)Usage:npt thread crossovers are widely connected to pipelines to convey water,gas,air,oil,etc.
6)brand name:Jz

our company provide malleable iron pipe fittings China,if you need that pls contact  us.

45°Banded Elbow For Sale

Our main products include malleable iron pipe fittings,steel pipe and nipples,grooved couplings &fittings,widely used in connecting pipelines which convey water,oil,gas etc.
45°Banded Elbow Factory Features:
1)long history:built in 1994
2)advanced technology and automatic product line
3)ISO9001&BV certificate
4)various malleable iron pipe fittings and lining plastic fittings
5)can produce various malleable iron pipe fittings according to customers' drawings or samples
Application
Mechanical Components
Marine hardware
Auto parts and accessories
Construction hardware
Cookware hardware
Medical Instrument parts
pump & valve parts and accessories
Impellers and propellers accessories
Pipe Fittings or pipeline accessories
Other industry metal casting parts